• Brand
  • Type

Use when a multiple drops are required from the NMEA 2000® backbone to connect another device...

Actisense Gender cables are desgined to connect 'male to male' or 'female to female' on a NMEA 2000 backbone.

Power Tap can easily provide power to the NMEA 2000 bus with micro fit connections to enable plug-and-play connectivity.

Allow NMEA 2000® installations through water tight bulkheads or panels.

For use at each end of the NMEA 2000 backbone to ensure proper operation and signal integrity, Actisense terminators are quick to install with a robust design.

The Actisense NMEA 2000 cable includes five wires within a single waterproof cable: power and ground wires, two signal wires and a drain wire.

The Bulk cable can also be acquired for a custom length at $3.99 / meter. For inquiries about that please email sales@actisense.ca

Standard T-Piece required for creating drop lines in a NMEA 2K network

The Actisense EMU-1 is a gateway that converts data from a single analogue engine sender into NMEA 2000 sentences, enabling NMEA 2000 display devices to monitor the engine ...

Covers for the NMEA 2000 Micro connectors, female and male versions available. Sold in quantities of 20.

The Actisense NMEA 2000 Micro Starter Kit provides the minimum cables and connectors any boaters will need to start building their NMEA 2000 network. We make it easy!

For use with the EMU-1 & NBF-3. The kit is suitable for use with a top-hat-rail, type EN 50 022 or a G section, type EN 50 035.

Cable Assembly 9 pin. D Type - Female.

Breathe new smart digital life into your old or new transducers, with digital signal processing technology.

Safely drive up to six NMEA Listeners, with power distribution for the connected Talker.