AS-A2K-KIT-1: NMEA 2000 Micro Starter Kit

The Actisense NMEA 2000 Micro Starter Kit provides the minimum cables and connectors any boaters will need to start building their NMEA 2000 network. We make it easy!

USD $119.00

 Find a dealer

The Actisense designed NMEA 2000 range of cables and connectors are certified and will be available from Actisense distributors and dealers in the next few months.

Superior to similar products available, Actisense have carefully considered the install and usability issues found with other manufacturers connectors and have designed the range with this is mind. The Actisense range of NMEA 2000® connectors and cables has been designed using specialist interconnect and NMEA knowledge. 

The Actisense NMEA 2000 Micro Starter Kit provides the minimum cables and connectors any boaters will need to start building their NMEA 2000 network. We make it easy!

What's included in the kit:

1 x Power Tap
Power Tap can easily provide power to the NMEA 2000 bus with micro fit connections to enable plug-and-play connectivity. The Actisense designed connectors are quality engineered and shaped to allow easy and secure connections. The 3 metre cable length ensures the A2K-MPT-1 offers flexibility when installing. The Actisense Power Tap is a simple and safe method of powering an NMEA 2000 network.

2 x NMEA 2000 (Micro) T-Piece
For use where a drop or 'port' is required from the NMEA 2000 backbone to connect another device. The quality engineered connectors are shaped to allow easy and secure connections, even when field-fit connectors are used - making it a totally unique T-Piece. Two holes in the connector allow for fast and secure screw-connection to the vessel.

2 x NMEA 2000 (Micro) Terminators
For use at each end of the NMEA 2000 backbone to ensure proper operation and signal integrity, Actisense terminators are quick to install with a robust design. One male and one female terminators are provided.

1 x NMEA 2000 Micro Cable (2 meters)
The Actisense NMEA 2000 cable includes five wires within a single waterproof cable: power and ground wires, two signal wires and a drain wire. The drain wire connects to the cable shield which protects the signal, power and ground wires from external Radio Frequency Interference (RFI) and helps reduce RFI emission from the cable. NMEA 2000 Micro cable can carry up to 3 Amps of supply current.

NMEA2K Power Feed Guide