A2K-PMW: Rear Panel Mount, Wired 5 Pin Micro

Allow NMEA 2000® installations through water tight bulkheads or panels.

USD $13.00

 Find a dealer

The Actisense designed NMEA 2000 range of cables and connectors are certified and will be available from Actisense distributors and dealers in the next few months.

Superior to similar products available, Actisense have carefully considered the install and usability issues found with other manufacturers connectors and have designed the range with this is mind. The Actisense range of NMEA 2000® connectors and cables has been designed using specialist interconnect and NMEA knowledge.

NMEA 2000 (Micro) T-Piece

Actisense now offer wired panel mount connectors, a great addition to the new A2K™ range of products.

The wired panel mount connectors are available in both male and female versions. The high quality connectors enable precise alignment and are simple and quick to remove and refit where required.

Designed to allow NMEA 2000® installations through watertight bulkheads (or panels), Actisense connectors have waterproof seals to ensure the integrity of the NMEA 2000 connection and the bulkhead/panel.

The female connector offers further flexibility as it can easily replace any existing 'drop' gland on the Actisense QNB-1 to create a pluggable NMEA 2000 connection option.

NMEA 2000 certified and fully compatible with other NMEA 2000 connectors and devices.

Part numbers:

A2K-PMW-F Rear panel mount, wired 5 pin micro female

A2K-PMW-M Rear panel mount, wired 5 pin micro male

Parameter Description
   
Electrical  
Rated Current 4 A
Rated Voltage 60 V (AC/DC)
   
Mechanical  
Contacts Brass, gold plated
Contact Carrier Nylon & GF
Contact Polarisation Standard M12 - "A" - Polarisation
Mating Thread M12
Female O-Ring Seal Rubber Green
Housing Brass, nickel plated
Mounting Thread PG9 (see diagram)
Mounting Nut Brass, nickel plated - PG9
Mounting Hole Dimensions 15.3mm (diameter)
Wires 18 AWG (stripped and tinned)
Wire Jacket PVC
Weight 20g
   
Approvals and Certifications  
Protection IP67 (when mated)
Operating Temperature - 20°C to + 90°C
Connector Specification Meets IEC61076-2-101
NMEA 2000 Pending  
RoHs Compliant  
UL Certified (E321413)  

Data Sheet

Power Guide